User Guide for MeshCore Devices from Toolbox Gadgets
Introduction
Thank you for purchasing a MeshCore device from Toolbox Gadgets! This guide will walk you through the steps to get started with your device and join the MeshCore network.

Note: This guide is based on the MeshCore Quick Start Guide and is licensed under Creative Commons Attribution-ShareAlike 4.0. For more detailed information, please refer to the full version and the MeshCore FAQ.
Prerequisites
- MeshCore Device: Your new device from Toolbox Gadgets.
- Internet Connection: A stable internet connection to configure the device.
- Computer or Mobile Device: A computer or mobile device with internet access.
Step 1: Unboxing and Initial Setup
- Open the Package: Carefully open the box containing your MeshCore device.
- Inspect the Device: Check the device for any damage and ensure all parts are present.
- Find the Configuration Button: Locate the configuration button on the device. It is usually larger or towards to top of the display.
Step 2: Connecting to the Device
- Power On the Device: Press and hold the configuration button until the device powers on. You should see an indicator light turn on.
- Download and Install MeshCore Software: Download the MeshCore software from the official website and install it on your computer or mobile device.
- Connect to the Device: Ensure your device is connected to the internet. Connect your computer or mobile device to the same Wi-Fi network as your MeshCore device.
Step 3: Configuring the Device
- Open MeshCore Software: Launch the MeshCore software on your computer or mobile device.
- Scan for Devices: Click the “Scan” button in the software to detect your connected MeshCore device.
- Follow the On-Screen Instructions: Follow the on-screen instructions to configure the device. This includes setting the device name, network ID, and other settings as required.
Step 4: Joining the MeshCore Network
- Network Details: Enter the necessary network details such as the server address, port, and authentication token provided by Toolbox Gadgets.
- Save Configuration: After entering the network details, save the configuration settings.
- Connect to the Network: Click the “Connect” button to establish a connection with the MeshCore network.
Step 5: Testing the Connection
- Device Status: Verify that the device is connected to the network by checking the device status in the MeshCore software.
- Send Test Messages: Try sending test messages to ensure that the device can communicate within the network.
- Check Received Data: Ensure that the device is receiving data correctly from the network.
Step 6: Additional Resources
- Full Version Guide: For more detailed information, please refer to the MeshCore Quick Start Guide.
- FAQs: Visit the MeshCore FAQ for answers to frequently asked questions and troubleshooting tips.
